25mm Rebar Tip Saw Cutter

• Lightweight, high-speed, high-power cutter with a weight of only 4.2 kg, compatible with D25 high-strength rebar (grade60/SD490).¹
• High efficiency significantly increases the life of each chip saw blade by more than 20% compared to the conventional model (HSC-25BLN).
• Cost-effective original chip saw with a strong irregular triple pin system. Despite its simple design without flanges, it achieves stable cutting performance and reliable wearability (with a function to prevent mis mounting).
• Optimal power supply system + heat generation protection by large controller greatly increases the continuous working time before stopping.
• Equipped with a 40V max motor that achieves a high power of more than 100V AC even though it is a cordless type.*²
• Over 65 times D25 rebar cuts per 2.5 Ah battery realized.*¹
• After cutting all screws, the nut can be inserted without deburring.
• 40V max battery is IP56 dust and water resistant for use in all environments Specification.*²
• The bottom plate cover is bolted from above, making it easy to change blades, and the surface treatment enhances wear resistance during cutting.
• Handle can be installed either on the left, right or upper side.

*1 Based on our test values. The number of cuts varies depending on the cutting situation.

*2 Products labeled with IP are designed to be less susceptible to dust and water, but we do not guarantee that they will not malfunction.